The Relic
It’s all about good turns and big smiles with, “The Relic.” It reminds us that snowboarding is fun, and turning is fun. Lay it over, drag your hands, spray your friends and throw up some rooster tails! “The Relic” was designed with good times and better turns in mind. Groomers, trees, open bowls, it doesn’t matter, it is ready to slice up the mountain no matter the conditions. Euro carves yo!
The Relic has a medium flex, tip to tail, that is softest in the nose and gets progressively more stiff towards the rear. The wider but softer nose allows the board to move into a turn effortlessly, while still giving stability. The more narrowed, stiff tail, is still maneuverable but provides ample pop. The torsional flex is a medium stiff flex with edge control in mind. These two flex patterns combined allow easy turning, especially at slow speeds, but provide better edge hold than a softer flexing board. The board has larger dimensions than similar length boards, allowing the rider to size down without losing stability. A slight rockered nose allows the board to transition from flat base to edging without the nose hooking and diving into a turn. Camber between the feet give the rider the power and edge hold to hang on and power through those oh so good euro craves. PU sidewalls and a TPU top sheet help dampen the board without completely muting feedback through the board. Pu sidewalls are stronger than ABS and more resistant to cracking.
Core- Poplar
Fiberglass- Triax glass
Stringers/Runners- 2x 5mm bamboo stringer 1x 20mm carbon stringer from rear inserts to tail (lightens board, improves pop)
Sidewalls- PU (helps dampen board, stronger more resistant to cracking)
Top Sheet- TPU (helps dampen the board, does not restrict natural flex of board)
Base- Sintered WFO
The Details Matter.